Stucco (EIFS) repair and replacement
Stucco and EIFS services we provide
Stucco and EIFS (Exterior Insulation and Finish System) are the finished wall surfaces on many condo towers and apartment buildings. Both keep water out as long as the finish, the sealant joints and the flashings stay intact.
Aspect Restoration repairs damaged areas, restores the wall assembly underneath where water has reached it, and replaces the cladding when repair is no longer practical.
- Crack repair and patching of damaged areas
- Re-stuccoing of full elevations
- EIFS repair and full replacement
- Insulation, sheathing and steel stud repair
- Air and vapour barrier repair and tie-ins
- Sealant joints and metal flashings at windows, sills and terminations
How an unrestored EIFS wall ages over 40 years
Sound and watertight
The finish coats shed water and the sealant joint at the window is intact.
These are typical failure patterns for Ontario's climate, shown for illustration. They are not a prediction for any specific building: materials, detailing and maintenance history can shift these timelines by years. Only a professional assessment can show where your building stands.
Repair or replacement
We recommend repair when the wall assembly is sound and replacement when the damage is widespread. Our assessment gives your board the scope for both options.
When repair is enough
- Cracks and damaged areas are limited and local
- The insulation and sheathing are dry
- Leaks trace to specific joints, flashings or penetrations
- The finish is firmly bonded to the wall
When replacement is needed
- Moisture is widespread behind the finish
- The sheathing or framing has deteriorated
- The system has no drainage layer and continues to trap water
- The same areas have been repaired repeatedly
Frequently Asked Questions About Stucco (EIFS)
EIFS stands for Exterior Insulation and Finish System. It is a wall cladding made of insulation board, a reinforced base coat and a textured finish coat, and it is often called synthetic stucco. Traditional stucco is a cement plaster applied over metal lath.
It can often be repaired. We repair local cracks, impact damage and failed joints when the insulation and sheathing underneath are dry and sound. When moisture damage is widespread, replacing the affected elevations is the more reliable option, and we give your board the scope for both.
We inspect the wall, take moisture readings, use infrared scanning where it helps, and make small test openings to examine the insulation and sheathing. The findings go into a written report with photos.
Cracks at window corners, staining below windows and joints, sealant that has hardened or pulled away, bulging or soft areas, and finish that sounds hollow when tapped. The damage often starts behind the finish, so a wall can look sound while the sheathing behind it is wet. An assessment shows what is happening inside the wall.
No. The work is done from the exterior. Residents receive written notice through the property manager, and the wall is closed weather-tight at the end of each day.
Many repairs proceed from our assessment and a written scope. When a board, insurer or permit requires stamped reports or drawings, we provide them through our engineering partner, Apollo Building Group. If your building already has a consultant, we price to their specification.
Have a question that isn't covered here? Ask us directly
Related building envelope services
Learn More
Caulking & Sealants
We seal window perimeters and panel joints, and run full-building re-caulking programs.
Learn More
Metal Cladding & Flashing
We repair or replace metal panels, flashings, parapet caps and copings.
Learn More
Assessment & Leak Investigation
We trace leaks, water test the envelope and scope the project for your board.
Tell us about your project
Tower or home, anywhere from downtown Toronto to the far side of the province, send us the details and we will come back to you within one business day.